This tutorial will show you how to create a Windows To Go USB drive that supports Mac computers, then you can run Windows to go on a Mac computer to complete the work that must be done under Windows.
Buy an older model of MacBook Pro which still supports booting Windows 10 with Hyper-V enabled. I would recommend option 1. Both because a newer model gives you more bang for the buck usually, but also because Microsoft might in the future upgrade the Hyper-V functionality to work on the UEFI-only systems without CSM such as the latest MacBook Pro. Running Windows software on a Mac. To run your app once installation has completed, open Crossover Office if it isn’t already open, and ensure the All Bottles link at the top left is selected.
I hav a late 2016 MacBook Pro with MacOS and Windows 10 Pro dual systems installed on it, so far so good, but I only use Windows 10 Pro to play some games that can't be run on MacOS. Now I'm trying to get rid of my Bootcamp installation, because of low space on main SSD drive. I noticed that WinToUSB can install Windows to a USB drive, can the Windows USB drive created by WinToUSB be started from a Mac computer? How do I make it? Could let me know step by step for using your tools. Can i play pubg on macbook pro.
Yes, the Windows To Go USB drive created by WinToUSB can be started from a Mac computer, but not all Windows To Go USB drive created by WinToUSB can be started from a Mac computer. So we need to understand what causes the WinToUSB USB drive to fail to boot and then we can effectively avoid it.
1. Now All of Apple's computers use Intel CPUs, and Apple selected the Intel-designed Extensible Firmware Interface (EFI) as its BIOS firmware to replace the Open firmware used on the PowerPC architecture. So in order to boot a Mac computer, we have to make sure that the Windows To Go USB drive that we created supports EFI booting.
2. For booting Windows on an (U)EFI-based computer, the Windows version must match the PC architecture, that means a 64-bit (U)EFI-based computer can only boot 64-bit versions of Windows and a 32-bit (U)EFI-based computer can only boot 32-bit versions of Windows. Mac computers use 64-bit Intel CPUs, so make sure you use 64-bit Windows to create Windows To Go.
Step 1. Download Mac Boot Camp Support Software for Windows To Go, please refer to:
How to download Boot Camp Windows Support Software for Windows To Go?
Step 2. Copy the Boot Camp Support Software downloaded in the previous step to the computer with an installed copy of WinToUSB, and connect the destination external hard drive or USB flash drive to this computer, then run WinToUSB.
Step 3. Click the button, then click the button and select the Windows installation ISO file from the open dialog box.
Step 4. WinToUSB scans for and lists available operating systems. Pleae select the edition of Windows you want to install, then click 'Next'.
Step 5. Select the destination drive in the drop-down list. If the drive is not correctly recognized by WinToUSB, please click the button for the program to recognize the drive.
Step 6. A pop-up will appear asking you if you want to format it to continue, select the partition scheme you want to use and click 'Yes' to format it. Mac computer is a UEFI based computer, so you have to select the 'GPT for UEFI' or 'MBR for BIOS and UEFI' option as the partition scheme. If you choose 'Keep the existing partition scheme', you need to manually prepare the partitions on the USB drive before this step, and here is the user guide on how to manually prepare partitions for Windows To Go. Please note that the 'Keep the existing partition scheme' option is valid only for an external disk.
Step 7. Select the system partition and boot partition from the partition list, the selected partitions will be marked as red, specify the directory of the additional drivers as the save path of Boot Camp Support Software, then click 'Next'.
Tips:Step 8. After clicking 'Next', WinToUSB begins installing Windows. How to unlock macbook with watch.
Step 9. It takes some time to install. After installation, safely unplug the USB drive from the Windows computer, then connect the USB drive to the Mac computer you want to boot. If you have only the USB-C interface on your Mac computer, you will need to use the USB-C to USB Adapter to connect the USB device to your Mac computer.
Step 10. Power on the Mac computer, and then immediately hold down the Option key, then select the USB drive and press Return to boot from it.
How do i backup my macbook pro. Step 11. Windows normal installation starts up and you have to complete all the installation steps. If the Mac's own keyboard or touchpad does not work, you have to use an external USB keyboard or mouse to complete the installation. After that, you can install Windows Support Software (Boot Camp drivers), programs, copy files, etc.
Now you know how to create and run Windows To Go on a Mac computer with the best free Windows To Go Creator WinToUSB, you can also use WinToUSB to clone existing Windows to a USB drive and then boot Windows from that USB drive on a Mac computer.It can’t be done.
Update: It seems that it really can’t be done now, if you’re running a later version of macOS. I’ve had reports of Boot Camp crashing if you try to amend the Boot Camp Assistant software as outlined in Step 2 below.
Well, not if you take Apple’s Boot Camp software at face value. It suggests that only Windows 7 can be installed, and (by implication) anything newer should be left to newer Macs. But having seen the specifications of some modern Windows PCs I was fairly confident that it would run. Possibly even quite well. So I persevered.
There is a lot of advice about how to get later versions of Windows running on older Macs. Much of it is very complicated and quite possibly works if you know exactly what you are doing and the wind is behind you.
I tried some of these more complicated solutions without any success. I spent several hours over a number of days disabling system integrity protection (which doesn’t sound like a good idea), manually blessing disks (really), and creating special versions of the Windows 10 installer DVDs, which ultimately told me to press any key and then proceeded to ignore that key press and do nothing.
The wind has been very swirly recently.
Graphic art software for mac. In the end I decided to adopt a more basic approach: I simply overrode the Boot Camp setting that said it couldn’t be done.
And it was simple – changing one number in the appropriate info.plist file.
Then I ran Boot Camp again and was told that of course my 2008 MacBook Pro was more than capable of running any version of Windows and when would I like to begin? I’m paraphrasing slightly. So I put in my Windows DVD and ran through the process of selecting a partition size and installing the operating system – all without any issues.
Then, when Windows 10 was successfully installed, I ran the Windows Boot Camp support software – and was told that it wasn’t compatible. Having heard that before, I ignored it and instead of running the main setup executable, installed the drivers via the Windows driver package that was also available with the support software (BootCamp.msi). Once that had crashed (oh) and I’d rebooted the computer I found that nearly everything was working as expected, with a crisp looking display and basic touchpad support.
There are one or two issues that I still need to look at – such as getting two finger scrolling working – but nothing that you don’t get with most new PCs (don’t ask my girlfriend about her oversensitive ASUS touchpad if you value your life). And the whole process was a lot simpler and quicker than trying to install Windows manually.
Now I have to remember why I started this process in the first place.
If you follow these steps you do so at your own risk and with no guarantee that things will work out. I used a late-2008 MacBook Pro. Others of a similar vintage might well work.
Get a copy of Windows 10. Fairly obvious but worth mentioning. You can download a copy of the Windows installer DVD in iso format from here:
You will need the 64 bit version.
To keep things simple you will need to create an actual DVD from this file, but in El Capitan that is very easy. Once the file is downloaded, insert a blank DVD (we all have those still lying around don’t we?), right-click on the iso file and select Burn to Disc.
Folx pro 5 4 – download manager job. This is the important bit. Find the Boot Camp Assistant software in the Applications > Utilities folder on your Mac, right-click and select ’Show Package Contents’. That should open up the software package to show a Contents folder. Open that and you’ll see a list of files including one called info.plist, which is the main configuration file for the Boot Camp Assistant software.
Open that file in a text editor (I use the excellent TextWrangler) and look for this block of text:
We are interested in the MacBookPro entry. This part of this configuration file says that anything before the MacBook Pro 5,5 should only have Windows 7 installed. You can find out the version of your MacBook Pro in El Capitan by selecting ‘About This Mac’ from the Apple menu and then System Report. All you need to do is make sure that the number in the info.plist file is earlier than the MacBook Pro you are attempting to install the Windows operating system on. I changed it to MacBookPro4,5 to be on the safe side.
Save the file.
Run the Boot Camp Assistant software, tick both boxes when prompted to do so and follow the on screen instructions.
You will need a USB flash drive to install the Apple support software for Windows (this includes all of the drivers required to get the screen, keyboard, trackpad etc working).
When the whole process is over and Windows has installed, make sure the USB flash drive is attached.
Unfortunately the main setup.exe file on the USB flash drive won’t run properly. It will tell you that you can’t install the drivers for this Mac. Fortunately, you can ignore this and install the drivers manually by navigating to BootCamp > Drivers > Apple on the USB flash drive and running BootCamp.msi by double-clicking on it. This process may hang – it did for me when attempting to install some audio drivers.
Whether it does or not, once it has finished you should reboot. Windows should restart with most of the relevant drivers in place. Or you might end up with no sound like me. Fortunately I was able to resolve that by diving back into the BootCamp > Drivers folder and then into the RealTek folder to install the audio drivers by running RealtekSetup.exe. After another reboot the audio was fine.
So far, I haven’t come across any major problems other than the audio. I’ve installed Visual Studio and tried a few other things and it has all worked as expected. Obviously your mileage may vary and there are no guarantees, but it certainly works well enough for what I need.
It can be done.
0 
Star